User manual

ESC b {m} {n1}... NUL Sets vertical tab stop in one of the 8 Vertical Format Unit
(VFU) channels available (EPSON mode). A.11
ESC / {m} Select the Vertical Format Unit (VFU) channel
(only EPSON mode) A.12
VT Advances paper to the next vertical tap stop of
the selected VFU channel. A.12
ESC b {m} NUL Cancels all current vertical tab stops set in the specific
VFU channel (only EPSON mode). A.12
ESC R Sets horizontal and vertical tab stops to default values
(only IBM mode). A.12
SO or ESC SO Sets double width printing. A.13
DC4 Cancels double width printing. A.13
ESC W {n} Sets or cancels double width printing. A.13
ESC [ @ {l} {h} {m1}...{m4} Changes height and width of characters and
modifies vertical spacing appropriately (only IBM mode).A.13
ESC w {n} Sets or cancels double high printing (only EPSON mode).A.14
ESC E Sets emphasized printing. A.14
ESC F Cancels emphasized printing. A.14
ESC G Sets double strike printing. A.15
ESC H Cancels double strike printing. A.15
ESC S {n} Sets subscript or superscript printing. A.15
ESC T Cancels subscript or superscript printing. A.15
ESC 4 Sets italics printing (only EPSON mode) . A.15
ESC 5 Cancels italics printing (only EPSON mode). A.15
ESC - {n} Sets or cancels underlined printing. A.15
ESC _ {n} Sets or cancels overscore printing ( only IBM mode). A.16
ESC q {n} Select character style (only EPSON mode) A.16
ESC ! {n} Select printing mode (only EPSON mode). A.16
ESC ( - Select the score line (only EPSON mode). A.17
LF Advances paper one line. A.17
ESC 5 {n} Sets an automatic line feed after a carriage return
(only IBM mode). A.18
FF Advances paper to the top of next page. A.18
ESC J {n} Advances paper n/216 or n/180 inch. A.18
ESC j {n} Reverses paper n/180 inch (only EPSON mode). A.18
ESC 7 Selects Character Set 1. A.18
ESC 6 Selects Character Set 2. A.19
ESC t {n} Selects Character table (only EPSON mode). A.19
ESC R {n} Selects national character set (only EPSON mode). A.19
ESC k {n} Selects character typestyle. A.20
ESC [ T Selects code page (only IBM mode). A.20
ESC EM {n} Ejects single sheet and selects/deselects the ASF
(only EPSON mode). A.20
ESC EM R Ejects paper and disables printer (offline) once
(only EPSON mode). A.21
ESC K {n1} {n2} {p1}...{px}
Prints normal density dot graphics (60 dpi). A.21
ESC L {n1} {n2} {p1}...{px}Prints double density dot graphics at half speed
(120 dpi). A.22
ESC Y {n1} {n2} {p1}...{px}
Prints double density dot graphics at normal speed
(120 virtual dpi). A.22
ESC Z {n1} {n2} {p1}...{px}
Prints quadruple density dot graphics (240 virtual dpi). A.22
ESC * {m} {n1} {n2} {p1}...{px}
Sets dot graphics mode
(EPSON LQ and IBM Proprinter XL24 AGM modes). A.22
ESC [ g {l} {h} {m}{n1}...{nk}
Selects 8/ 24 needle dot graphics mode (only IBM mode). A.23
Appendix A
A78401745-001
A.3