User manual

Error Handling
When an error condition exits: the ERROR indicator blinks, the buzzer sounds
if the BUZZER funtion is set to ON in the Printer Setup mode and the display will
show the error message.
Error Message Description
PAPER EMPTY ERR
Indication: Printer runs out of paper.
Solution: Load paper into the printer and press the
ON LINE/ ←
key to make the
printer on-line.
This error is only indicated when the
PE DETECT
function , is
set to
ON
in the Printer Setup mode.
CA POSITION ERR
Indication: A carriage position error has occurred.
Solution: Press the
ON LINE/ ←
key to make the printer on-line.
HP ERR (at Power On)
Indication: A home position error has occurred.
Solution: Try to turn the power switch OFF and then ON again. If the error is not
cleared, call Technical Assistance.
ASF ERR
Indication: A paper load or eject error has occured in the ASF mode.
Solution: To clear the error at the printing, press the
ON LINE/ ←
key to make the
printer on-line and resume printing
.
To clear the error at loading or ejecting the paper, press the
FORM
FEED/
↓
or
LOAD/PARK
/
→
key to load or eject the paper.
EJECT ERR (Single sheet)
Indication: A paper eject error has occurred,
Solution: Press the
FORM FEED/
↓,
LOAD-PARK/
→,
ON LINE/
←
key to eject the
paper.
☞
☞
Chapter 4
4.4
A78401745-001