User manual

Tear-off position adjustment
The tear-off position can be adjusted by following the procedure below:
◆
Select the 1 value in the TEAR OFF POSITION function in the Printer
Setup.
◆
Set the printer in off-line status.
◆
Perform the tear-off operation.
◆
Adjust the tear-off position by pressing both the
ON LINE/ ←
and the
LINE
FEED/↑,
keys or the
ON LINE/←
and the.
FORM FEED/↓.
keys
◆
The paper is fed while the above keys are pressed. When tear-off down is
executed, automatically the new tear-off position is set and the buzzer
sounds to indicate that the setting is complete.
If the buzzer sounds while the keys are held, the printer stops feeding the paper
and alerts that you have exceeded the adjustable range.
Chapter 3
A78401745-001
3.37