User manual

Normal Mode
Pressing this key selects the font.
Setup Mode
Invalid
Buzzer
This printer is provided with a buzzer to indicate specific conditions. The
buzzer signal changes according to the error detected. The buzzer only sounds
when the BUZZER function is set to ON (see "The Printer Setup" described
before). See the following table:
Sound Cause
1 short "beep" A BELL command is received
4 melody "beeps" A paper empty error condition
Twice 2 short "beeps" The friction release lever is moved while
the paper is loaded in the printer
3 long "beeps" The single sheets cannot be ejected
3 short "beeps" The carrier cover is open
Chapter 3
A78401745-001
3.9