User manual

ESC SP {n}
Sets intercharacter space (only EPSON mode).
1B 20 {n}
27 32 {n}
0 ≤ n ≤ 255
This command sets the intercharacter space to n/120 inch in Draft and n/180
inch in Quality.
ESC $ {n} {m}
Sets absolute dot position (only EPSON mode).
1B 24 {n} {m}
27 36 {n} {m}
0 ≤ n, m ≤ 255
The dot position is calculated as {m}*256+{n}.
ESC \ {n} {m}
Sets relative dot position (only EPSON mode).
1B 5C {n} {m}
27 92 {n] {m]
0 ≤ n, m ≤ 255
This command sets the relative dot position, so that the print head is moved to a
dot position specified relative to its current position. The unit of the dot is 1/120
inch. The Right Side position is calculated as {m}*256+{n}. The Left Side
position as 65536-{m}*256+{n}.
ESC d {n} {m}
Spaces forwards relative dot position only(only IBM
mode).
1B 64 {n} {m}
27 100 {n} {m}
0 ≤ n, m ≤ 255
This command causes the print head to be moved to a dot position calculated as
{n+m*256}/120 inch on the right of its current dot position. If the selected position
is outside the current right margin, it is forced to last column.
Appendix A
A.34
A78401745-001