User manual

n Selection
0 10 cpi Draft
2 10 cpi Quality
3 Proportional Quality
4 DLL 10 cpi Draft
6 DLL 10 cpi Quality
7 DLL Proportional Quality
8 12 cpi Draft
10 12 cpi Quality
12 DLL 12 cpi Draft
14 DLL 12 cpi Quality
16. 17 cpi Draft
18 17 cpi Quality
20 DLL 17 cpi Draft
22 DLL 17 cpi Quality
The setting of this command overrides any selection made from the operator panel.
ESC \ {n} {m}
Prints characters from IBM PC Character Set (only
IBM mode).
1B 5C {n} {m}
27 92 {n} {m}
0 ≤ n ≤ 255
0 ≤ m ≤ 255
This sequence specifies that subsequent characters are to come from the table of
all printable characters (IBM PC Character Set). The {n} parameter specifies the
remainder of the number of characters that you want to print divided by 256. The
{m} parameter specifies the integer result of the number of characters that you
want to print divided by 256. The control codes are not recognized as long as this
sequence is active. The space character is printed as an unassigned character.
ESC ^ {n}
Prints one character from IBM PC Character Set
(only IBM mode).
1B 5E {n}
27 94 {n}
0 ≤ n ≤ 255
This sequence specifies that subsequent character {n}is to come from the table
containing all the printable characters.
Appendix A
A.30
A78401745-001