User manual

Miscellaneous
BEL
Sounds the buzzer.
07
7
This command sounds the buzzer for about 1 seconds.
BS
Moves the printer carriage one character to the left.
08
8
Terminator code. This code causes the printing to be continued from one column
to the left of the current carriage position.
CAN
Cancels data on same line.
18
24
This command causes the printer to delete data in the same line before the CAN
code. Commands except SO and ESC SO are not affected.
DEL
Deletes last character sent (only EPSON mode).
7F
127
This command causes the printer to delete the last character sent to the printer.
This does not affect control codes.
CR
Causes all received data to be printed out.
0D
13
Terminator code. The column counter is set to the left margin value and a line
feed is inserted automatically after carriage return A line feed may be added if the
AUTOFEEDXT signal is held LOW and the AUTO XT function is selected in the
Printer Setup.
Appendix A
A.28
A78401745-001