User manual

ESC 5 {n}
Sets an automatic line feed after a carriage return
(only IBM mode).
1B 35 {n}
27 53 {n}
0 ≤ n ≤ 255
If {n} is equal to {odd number}, this command sets an automatic line feed on
receiving a CR code. If {n} is equal to {even number}, this command cancels the
automatic line feed.
FF
Advances paper to the top of next page.
0C or 1B 0C
12 or 27 12
Terminator code. It advances the paper to the first printable line of the next form.
ESC J {n}
Advances paper n/216 or n/180 inch.
1B 4A {n}
27 74 {n}
1≤ n ≤ 255
Terminator code. In IBM Proprinter XL24 mode, the paper advances n/216 or
n/180 inch according to ESC { \ setting; otherwise, the paper will be advanced
n/216 inch. The column counter will be set to the left margin value if automatic
carriage return has been selected. In EPSON LQ and IBM Proprinter XL24 AGM
modes, the paper advances n/180 inch.
ESC j {n}
Reverses paper n/180 inch (only EPSON mode).
1B 6A {n}
27 106 {n}
1≤ n ≤ 255
Terminator code. The paper reverses n/180 inch without any resetting of the
column counter.
Character Set Selection
ESC 7
Selects Character Set 1.
1B 37
27 55
Appendix A
A.18
A78401745-001