Specifications

4-122
Guide to Printers and Printing
Collation and
Number of
copies
The optra W810 printer supports collation of multiple copies of a print
job internally. This feature is controlled by the –W and –S flags of the
qprt command.
–S!
collation off
–S+
collation on
–W#
number of copies
Notes:
1. This function is independent of the –N flag of the qprt command.
The –N# flag will cause the print job to be sent to the printer #
times. The –W# flag will send the print job once, and # copies of
the job will be printed.
2. The function is limited by the amount of memory installed in the
printer and the size of the print job.
Separator
Pages
The printer supports internally generated separator pages. This
feature is controlled by the –E flag of the qprt command.
–E0
None
–E1
Between Copies
–E2
Between Jobs
–E3
Between Pages
The paper source defaults to Tray 1. To change the default, the uS
attribute must be changed in the virtual printer. The valid values for uS
are:
uS 1
Tray 1
uS 2
Tray 2
uS 3
Tray 3
uS 4
Tray 4
Note: This function is independent of the –B flag of the qprt
command.
Finisher Stapes The Optra W810 printer supports this option if it has an optional
Finisher installed. The valid values for y are:
–y 0
Off
–y 1
On