Specifications

4-114
Guide to Printers and Printing
Separator
Pages
The –E flag controls separator pages. The valid values are 0, 1, 2, and
3, which represent NONE, BETWEENCOPIES, BETWEENJOBS, and
BETWEENPAGES, respectively. The separator page source defaults
to TRAY 1 and is specified via the uS attribute. The valid values for uS
are the same as for header and trailer pages (uH and uT respectively),
except that the Manual Feeder is not supported. To change the
default, the uS attribute must be changed in the virtual printer to one of
the valid values (see the chvirprt command).
Output
Destination
The –= (equal sign) is the command line option for specifying the
output destination. Valid values are:
0
standard bin
1
bin 1
2
bin 2
3
bin 3
50
active bin
The default value for the output destination is the standard bin (0).
Note that if the active bin is selected, the printer will select the bin
based on the state of output bin capacity sensing and the operator
panel setting for ”Configure Bins” under the PAPER MENU. See your
printer manual to determine exactly how the printer will respond.