Specifications

4-91
Printer, Plotter, and Spooler Subsystem Programming
Lexmark Optra K 1220 Printer
Paper
Source
Paper source selection is supported for both the ”enhanced PCL (R) 5e
emulation” and the ”PostScript (tm) Level 2 emulation” by using the –u flag
of the qprt command. There are several optional input sources (see your
manual to determine which are installed). These numbers apply, no matter
which ones are present. If one is not present, choosing one of those will
simply default as per the user’s manual. The input source number is the
same for both PCL and PostScript:
–u 0
manual feed
–u 1
tray 1
–u 2
tray 2
–u 3
multipurpose tray
By default the banner and trailer pages come from tray 1. To change the
default, change the values for the uH and/or uT attributes respectively in
the virtual printer to the value for the desired paper source. Do this using
the chvirprt command. Valid values are the same as for the –u flag.