Specifications

4-83
Printer, Plotter, and Spooler Subsystem Programming
Duplex Mode The optional duplex feature is supported by the –Y flag of the qprt
command.
–Y 0
simplex
–Y 1
duplex, long–edge binding
–Y 2
duplex, short–edge binding
Collation The Optra Plus printer supports collation of multiple copies of a print job
internally. This feature is controlled by the –W and –S flags of the qprt
command.
–S !
collation off
–S +
collation on
–S #
number of copies
Note: This function is independent of the –N flag of the qprt command.
The –N# flag will cause the printer job to be sent to the printer # times.
The –W# will send the print job once, and # copies of the job will be
printed.
Separator
Pages
The Optra Plus printer supports internally generated separator pages.
This feature is controlled by the –E flag of the qprt command.
–E 0
None
–E
Between Copies
–E 2
Between Jobs
–E 3
Between Pages
The paper source defaults to Feeder. To change the default, the uS
attribute must be changed in the virtual printer. The valid values for uS
are the same as the paper source flag –u except that manual feed is not
a valid source.
Note: This function is independent of the –B flag of the qprt command.