Specifications

4-62
Guide to Printers and Printing
–K # Specifies the color rendering dictionary.
0
Default Printer Setting
1
Scanner
2
Highlight
3
Photographic
4
Presentation
5
Monitor
6
Solid Color
–S # Specifies the print mode.
0
Default Printer Setting
1
Photo Quality
2
Business Graphics
The following valid queue names are located on the IBM Network Color Printer:
ibmcolor_direct 1.03 or 1.1 controller code and 16MB of memory.
ibmcolor_print 1.03 or 1.1 controller code and 32MB or 48MB of memory.
ibmncp_direct 2.0 or higher controller code and 16MB of memory.
ibmncp_print 2.0 or higher controller code and 32MB or 48MB of memory.
Note: To determine the controller code level and amount of memory on your IBM
Network Color Printer, print a configuration page from the printer operator panel. See the
configuration page under ”GENERAL INFO.” Memory is the second item, and the third
item is version of the controller code. The predefined files on AIX 4.2.1 or later only
supports the IBM Network Color Printer 2.0 or higher controller code level.
IBM Network Printer 12, 17, and 24
IBM Network Printers can print on paper other than the default 8 1/2 by 11 inch size. The
paper size can be changed using SMIT as described in Specifying paper size on page 2-38
and see IBM Network Color Printer on page 4-61. To change paper size for a single print
job, specify the –Q flag with the qprt command.
To print more lines per page than the line space allows (6 or 8 lines per inch), specify the
number of lines per page. The line spacing is compressed to allow the larger number of
lines to fit on a page. For example, if the line spacing is 6 lines per inch, entering the
command qprt –l 66 FileName causes the file FileName to print at 66 lines per
page instead of the default 60 lines per page.