Installation guide

2-11

Bull S.A. May 25th, 1999

9. PRTE42, PRTBull_mcode –

(Printers Management)

These packages are used for Bull printers management. PRTE42 is for AIX 4.2 and higher,

PRTBull_mcode is to upgrade microcode printers.

For more information refer to

Terminals and Printers Installation and Configuration Guide

(86 A1 22WE)

9.1 List of the Supported Printers

The following table lists the supported printers.

Type Emulation RS232C RS422A Centro Notes

Compuprint 200 HP–Deskjet+ – – Yes –

Compuprint 300 HPPCL3 Deskjet+ – – Yes b

Compuprint 415 HPPCL5, PostScript Yes Yes Yes a

Compuprint 914N Epson, IBM Proprinter Yes – Yes –

Compuprint 925 Epson, IBM Proprinter Yes – Yes –

Compuprint 925N Epson, IBM Proprinter Yes – Yes –

Compuprint 956 Epson, IBM Proprinter Yes Yes Yes –

Compuprint 1225 HPPCL5, PostScript Lev2 Yes Yes Yes –

Compuprint 1645e HPPCL5, PostScript Lev2 Yes Yes Yes –

SIGNUM 2043 Epson, IBM Proprinter Yes Yes Yes –

SIGNUM 2048 Epson, IBM Proprinter Yes Yes Yes –

BULL PR800 Serial Matrix Yes – Yes –

BULL PR800–vfu P.Series Yes – Yes –

BULL PR900 Serial Matrix Yes – Yes –

BULL PR900–vfu P.Series Yes – Yes –

BULL PR701 / 702 Serial Matrix Yes – Yes c

BULL PR801 / 802 Serial Matrix Yes – Yes c

BULL PR901 / 902 Serial Matrix Yes – Yes c

BULL PR701–vfu

BULL PR702–vfu

P.Series Yes – Yes c

BULL PR801–vfu

BULL PR802–vfu

P.Series Yes – Yes c

BULL PR901–vfu

BULL PR902–vfu

P.Series Yes – Yes c

Legend for the table (Notes)

a To use these printers with the RS422 interface, a special cable must be used. Its

reference is CBLG023–1800.

b No available cable for the serial link.

c No available cable for the RS422 link