Installation guide

1-16
Bull S.A.May 25th, 1999
10. Install Additional Device Software
If you want to install an add-on device ordered separately, you need to perform the following
operation:
• Insert the Bull Enhancement 2.25 CD-ROM
Note: You must use a Bull Enhancement CD-ROM release 2.25 or later to install
additional software on AIX 4.3.2. (For example do not use release 2.23 on AIX
4.3.2).
• Run these commands:
# smit update_all
INPUT device/directory for software: [/dev/cd0]
# smit cfgmgr
• If necessary reboot the System:
# shutdown –Fr
The list of the installed packages is given by:
# lslpp –L
11. Migration from AIX 4.1.x or 4.2.x to AIX 4.3.2
The migration of AIX 4.1.x or 4.2.x to AIX 4.3 is a complex operation, subject to frequent
updates. This is the reason why the present SRB does not provide the migration procedure.
In order to have the complete and up-to-date migration procedure, please contact your Bull
representative.
Note: Do not install IBM AIX PTF (Uxxxx) on Estrella 200 and Estrella 300 systems
without the formal agreement of your Bull representative.