Installation guide

1-14
Bull S.A.May 25th, 1999
9.8 Installing a Graphic Display
Refer to /usr/lpp/X11/README.MGA.Bull file to use your PCI High–Resolution
Graphics adapter with more than 8 bits per pixel.
Estrella 700: Configuration rules
– If one board GXT110P: GXT110P in Slot 1
– If one board GXT110P + one board GXT255P: GXT110P in Slot 1, GXT255P in Slot 2
– If one board GXT255P: GXT255P in Slot 2
– If a second board GXT255P: the second GXT255P in Slot 1
All Estrella Series:
An additional PCI graphics board may be plugged in your system.
– Choose a display type to select a set of possible resolution:
smit devices
–> Graphic Displays
–> Select the Display Type
– Configure the correct resolution and refresh rate:
smit devices
–> Graphic Displays
–> Select the Display Resolution and Refresh Rate
Choose the parameters in the following table:
Serie
Display Display Type
640
x480
800
x600
1024
x768
1280
x1024
1600
x1280
Board
200 DMUG012 PanaSync_5A 60 60 75 Mother Board
200 DMUG013 PanaSync_5A 60 60 75 60 * Mother Board
200 DMUG014 PanaSync_5A 60 60 75 60 * Mother Board
200 DMUG012 IBM_15V 75 75 75 GTFG037
200 DMUG012 IBM_15V 75 75 75 GTFG037
200 DMUG014 POWER display 20 75 75 75 75 60 GTFG037
300 DMUG012 LM15FST 60 60 75 PCI SVGA Graphics Cirrus
300 DMUG013 LM17FST 60 60 75 60 PCI SVGA Graphics Cirrus
300 DMUG014 PanaSync_5A 60 60 75 75 PCI SVGA Graphics Cirrus
300 DMUG012 LM_15FST 60 75 GTFG043
300 DMUG013 LM_17FST 75 60 GTFG043
300 DMUG014 Panasync_5A 75 75 60 GTFG043
700 DMUG012 IBM_15V 75 75 75 GTFG041/042
700 DMUG013 POWER display 17 75 75 75 60 GTFG041/042
700 DMUG014 POWER display 20 75 75 75 75 60 GTFG041/042
700 DMUG014 Standard ** ** ** ** ** GTFG041/042
Notes:
* 2 MByte DRAM needed.
** Plug & Play: Automatically choosen: VESA DDC1/2B compliant.