Installation guide

1-12
Bull S.A.May 25th, 1999
On Estrella 700:
# smit install_latest
Make sure to select the following options:
INPUT device/directory for software: [/dev/cd0]
SOFTWARE to install [all_latest]
3. Reboot the system:
# shutdown –Fr
Note for the PCI FDDI Adapters
The devices.pci.48110040 package present on the Bull Enhancement CD-ROM is
dedicated to the PCI FDDI adapters that are marked with the label B5-3, B5-4, or B5-5. If
your system has a PCI FFDI adapter without one of these labels, you have to load the
devices.pci.48110040 package from a separate media delivered with the adapter.
Consequently, if you have PCI FDDI adapters without the label B5-3, B5-4, or B5-5, the
devices.pci.48110040 package has been wrongly installed during the installation of the
Bull Enhancement CD-ROM. You must:
De-install the package:
enter smit remove and select:
SOFTWARE Name [devices.pci.48110040]
PREVIEW only? no
Install the package from the FDDI media as described in the special notes on page 2-7.
9.3 Install Bonus Pack Packages
Using SMIT you can install the packages that you need from the Bonus Pack CD-ROM.
Remark:
If the /etc/tftpaccess.ctl file was not used, the installation of the netstation package adds
the following lines in the /etc/tftpaccess.ctl file:
allow:/usr/netstation
allow:/usr/netstation/configs
allow:/usr/netstation/mods
allow:/usr/netstation/fonts/pcf/100dpi
allow:/usr/netstation/fonts/pcf/dw100dpi
allow:/usr/netstation/fonts/pcf/misc
allow:/usr/netstation/fonts/pcf/ns3270
allow:/usr/netstation/fonts/pcf/java
This allows to load the netstation package through tftp without login authorization, but
preventing access to all the other files of the system.
Restrictions:
The IPX/SPX Backward Compatibility Package ipx.rte contains older level IPX/SPX
protocol suite. This package is included in AIX Version 4.3 to handle the rare case when
an existing IPX/SPX application is not binary compatible with AIX Version 4.3 IPX/SPX
(ipx.base package). The ipx.rte package cannot be installed on a system that has
ipx.base installed.
It is not possible to install the UMS.info.en_US.user_gd since the bos.info.*
prerequesites are no more delivered with AIX 4.3.2.
9.4 Install SNA Packages and PTFs
Using SMIT you can install the packages that you need from the SNA CD-ROM.
When the packages installation is performed you need to install the PTFs that are present
on the SNA CD-ROM. Leave the SNA CD-ROM in the drive and proceed as follows: