Installation guide

1-11
Bull S.A. May 25th, 1999
4th Phase for Estrella 700 only: installation of the AIX PTFs
Note: Perform this operation on Estrella 700 only. The “AIX 4.3.2 Updates” CD-ROM does
not apply to Estrella 200 and 300.
Note: To install the fileset X11.loc.ZH_CN.base.rte 4.3.2.1 it is necessary to install the
fileset X11.fnt.ucs.ttf_CN 4.3.2.0 which is on the CD-ROM Volume 3 of AIX 4.3.2.
Follow this procedure:
1. Insert the “AIX 4.3.2 Updates” CD-ROM and enter:
smit update_all
Make sure to select the following options (“no” commitment is mandatory):
INPUT device/directory for software: [/dev/cd0]
COMMIT software updates no
2. When this operation is completed de-install the bos.rte.tty fileset; enter:
smit maintain_software
Select:
Reject Applied Software Updates
Select these options:
SOFTWARE name [bos.rte.tty]
REJECT dependant software yes
3. Get the following PTFs from the
www–opensup.bull.com Bull server (or contact your Bull
representative):
– U461248 bos.atm.atmle
– U461454 bos.mp
– U461208 bos.rte.tty
– U461236 bos.up
– U461423 dev.pci.14107c00.com
4. Install these PTFs on your system.
5th Phase: Reboot the System:
# shutdown –Fr
9.2 Install Bull Enhancement Packages
Note: To install isdn_access packages, you must stop synway; enter: smit synway then
select stop in the menu.
Note: To install bullx25 packages make sure that no application is running using
/usr/sbin/dat_x25 or /etc/datx25tcpd.
1. Insert the Bull Enhancement 2.25 CD-ROM.
2. According to your Estrella system (200/300 or 700) apply one of the following
procedures:
On Estrella 200/300:
# smit install_all
Make sure to select the following options:
INPUT device/directory for software: [/dev/cd0]
SOFTWARE to install [all]
AUTOMATICALLY install requisite software? no
OVERWRITE same or newer versions? yes
# smit update_all
INPUT device/directory for software: [/dev/cd0]