Instruction manual

v
z When you switch off the printer, you should wait for 5 seconds, do NOT
switch it back ON until all of operator panel indicators are turned off.
Failing to do so may damage the printer.
z Don’t touch the moving parts of printer while device is moving, in order to
prevent personnel injury or device damage.
z Moving the print head while the printer is ON may damage the printer or
cause scald. Furthermore, if you have just used the printer, the print head
may be hot; let it cool for a few minutes before touching it.
z Don’t drop metal objects into the printer (such as pin, staple, drawing pin
and etc).
.
z Do not spill liquid on the printer.
Installation Notices
z Place the printer on a sturdy, horizontal and stable surface.
z Your printer must not be exposed to direct sunlight, extreme heat, humidity
or dust.
z Don’t plug the printer to the outlet that is on the same circuit as large
motor or other high power consumption machines.
z Don’t place the printer in a place with strong magnetic field or caustic gas.
z The whole computer system should be kept away from electromagnetic
interference, such as loudspeaker or wireless telephone.