User manual

77
Adjusting the Tear-Off Position
F2 JAM SENS. Y
or
F1 JAM SENS. Y
↑
TEAR ADJUST: - 30
→
or
←
TEAR ADJUST: ...
→
or
←
TEAR ADJUST: +360
→
or
←
↓
BUZZER YES
TEAR ADJUST:
xxxx
These values adjust the distance between the Tear-Off Perforation and the
Tear-Off Bar. The values correspond to 1/180 inch units, i.e. the tuning ranges
between -1/6 and 2 inch.
0
is the default value.
See also “How to Use the Tear-Off Function”, later in this Chapter.