User manual

31
Message Description
OPER. INTERRUPTED
This message is displayed if the
ALTERNATE
key has been pressed to interrupt a
park procedure.
PARKING
The printer is parking the fanfold paper.
PATH CHANGING
The path has been changed and the printer is updating the settings.
PRESS A KEY
NVM CHANGED
The NVM has been changed. Press any key to set the printer.
RELEASE KEY
This message is displayed when you can release the
PROGRAM
key in the Self-
test selection or in the Power-on Configuration procedure.
REMOTE CONTROL
This message is displayed when the printer operates from remote control (only
if the LAN interface board is installed).
RESET & BREAK
The printer received a reset and break command via interface.
SELF TEST
Printing the self-test page.
TEAR IF NECESS.
EJECT PAPER
These messages are displayed when the printer receives a paper parking
command and the
TEAR NO
item is selected for the tear-off function. Tear off
the fanfold then press the
PARK
key to eject the paper.
TEAR IF NECESS.
PARK PAPER
These messages are displayed when the printer receives a paper parking
command. Tear off the fanfold paper if necessary and then press the
PARK
key
to park the paper.