User's Manual

(DSP) sound mode
9 News button Press to select news Digital Signal Processor
(DSP) sound mode
10 Movie button Press to select movie Digital Signal Processor
(DSP) sound mode
11 RCA button Press to select the RCA sound source for your
sound bar
12 AUX button Press to select the AUX sound source for your
sound bar
13 OPT button Press to select the optical sound source for your
sound bar
14 Bluetooth button Press to enter the Bluetooth input
(To enter force pairing mode, press and hold for
about 5 seconds)
Using the remote control
1. Remove the plastic battery cover by gently sliding it away from the remote
2. Insert the batteries and gently slide the battery cover back into place
3. Point the remote control directly at the IR sensor on the front of the sound bar
Setting up your sound bar
First step – Choosing your connection
1. Look at the back of your sound bar source device, such as a TV, DVD, or cable box, to
identify your audio output ports
2. Choose one connection option that fits your audio devices. You can connect several
devices and switch the sound source as required
Second step – Connecting your Sound bar
Digital Optical connection
1. Connect one end of the digital optical cable to your sound bar. Connect the other end
into the Digital Optical Output port on your audio device