User's Manual

BLUE SERIES

Battery

Charge the battery:

• Connect the USB Type-C cable to the power adapter.

• Plug the USB Type-C cable into the multi-purpose Type-C port

of the device.

• Plug the USB power adapter into an electrical outlet.

• When the battery is fully charged, disconnect the charger from

the device. Then unplug the charger from the electrical outlet.

You will need to charge the battery before using it for the first

time, or if it has not been used for a long time.

Use only manufacturer-approved chargers and cables that are

specifically designed for your device. Incompatible chargers

and cables can cause serious physical injury or damage your

device.

•Connecting the charger incorrectly may cause serious damage

to the device. (The warranty does not cover any damage

caused by misuse)

• Use only the USB Type-C cable provided with the device. The

device may be damaged if you use a micro USB cable.

• To save energy, unplug the charger when you are not using it.

The charger does not have a power switch, so it should be

unplugged from the electrical outlet when not in use to avoid

wasting energy.

• The charger should remain close to the electrical outlet, and

should be easily accessible while the device is charging.