User's Manual

Tablet Blue TW10Pro Series

Bogotá Colombia

operation modes, Sleep and Standby, which must be incorporated as

required practices in public offices. Then these concepts defined.

Standby Mode Standby.

The system automatically enters this mode after a period of inactivity, which

is set in the dialog box Power System. In standby mode, hardware devices,

such as display panel and hard disk, are turned off to conserve power.

Inactivity.

Defined as the time period in which the computer or monitor receives no

input signal activation. In the computer these signals are given by peripheral

input device, for example, keyboard, mouse movements, etc.)

Hibernate Suspend.

In this mode, all system data are saved on the hard disk before powering

down. When this mode is activated, all system state and contents are saved

to the hard drive after a period of inactivity defined by the user.

No power or very little power is drawn from the battery module in this mode.

However, depending on the amount of RAM that has been installed on your

Tablet, the amount of time the system requires to restore all its previous

contents can range from five to 20 seconds.

Power button action.

The Tablet power button can be set to turn off the system or activate the

suspend mode under an environment of operating systems.

Sleep mode (sleep).

Defined as the state of derating used by the computer or monitor after

entering or moving to a period of inactivity (To monitor these signals are

given by the computer). In practice, the computer keeps on consuming less

energy and with the monitor in black. This mode is deactivated when it

receives a signal from the mouse or keyboard.

Standby mode (off).

Defined as a state of "off" on tablets energy consumption (passive power)

as still connected to the mains. In practice the tablet is off, but consumes

very little power. It has two modes, one in which all programs are closed

and relight the tablets returns zero and the hibernation state in which is

stored on the hard disk the current state of Windows, that is, when you turn

on the tablet again It lights up with programs and windows that were active.