User`s guide

Memory Operations in the Editor
Spark
7-27
Exchanging memories switches the contents of 2 memories.
Example: Memory 5 is channel 5 @ 30. Memory 10 is channel 10 @ Full. when the
memories are exchanged Memory 5 is channel 10 @Full and memory 10 is channel 5 @
30.
Keypresses Results/Comments
1. Select memory 5.
2. Press [=]
Change to appears in the command line.
3. Press [MEMORY] [10]
4. Press [STORE
The message
Memory 10 Stored is displayed.
The contents of memory 5 and memory 10 are
exchanged.
Copying memories
You can copy the contents of a memory to a new memory.
Only the spots, channels, and their value are copied. This does not copy time assignments,
Parts, or Event Assignments.
To copy a memory including any time assignments, text, Loops, Parts, and Event
Assignments, perform the copy function in the Memory Operations menu.
Example: Copy memory 2 to memory 8.
Keypresses Results/Comments
1. Select memory 2.
2. Press [ENTER]
The channels and spots with their
intensity/parameter values appear as an editor
group.
3. Press [=]
4. Enter 8 on the numeric
keypad.
5. Press [STORE]
Only the contents of the memory (channels,
intensity assignments, scroller values, spots
and their parameter values) are copied.
Note
If the new memory number that you have selected is in use, the message Memory Exists is
generated. You can overwrite by pressing [STORE] again.