User`s guide

Igniting Spots
Spark
6-2
Igniting Spots
Most moving devices have a control channel for functions such as igniting the lamp,
extinguishing the lamp, resetting the device, and fan control.
This control channel is known as ignite and is included in the device definition. The
ignition sequences depend on what function you are requesting and on the ignition
channel’s definition.
Igniting DMX spots
Sending the default value
Keypresses Results/Comments
1. Select spots.
2. Press [IGNITE ON]
3. Press [ENTER]
The default value as defined in the device
definition is transmitted. The duration of the
transmission depends on the time as defined in the
device definition.
Sending a value other than the default value.
Example: To send a Reset command to a Studio Color device, send the value 64.
Keypresses Results/Comments
1. Select spots.
2. Press [IGNITE ON]
3. Enter [64] on the
numeric keypad.
4. Press [ENTER]
The Reset command is transmitted to the device.
The duration of the transmission depends on the
time as defined in the device definition.
For more information on defining the ignition control, see Chapter 21 Spot Management.