Specifications

CompuLab Ltd. IPC2 – Hardware Specification Page 57 of 83
5.2.3.1 DisplayPort Connector
Table 31 shows the pin assignments of the DisplayPort external connector on a downstream port
on a Source device (IPC2) and Table 32 show the pin assignments of the DisplayPort external
connector on an upstream port on a Sink device (DisplayPort Monitor).
Table 31 – Downstream Port DP Connector Pinout
Notes:
1. Pins 13 and 14 must be connected to ground through a pull-down device. External devices
and cable assemblies must be designed to not rely on a low impedance ground path from
these pins.
2. Pin 20, PWR Out, must provide +3.3V+/-10% with a maximum current of 500mA and a
minimum power capability of 1.5 watts.