Specifications

CompuLab Ltd. IPC2 – Hardware Specification Page 44 of 83
4.3 Wireless Networks
IPC2 configured with Intel 7260HMW module in mini PCIe half size form factor. The 7260HMW is
highly integrated 2.4/5GHz dual band IEEE 802.11ac and Bluetooth 4.0 in a single Intel 7260 chip
with two host interfaces, PCI Express Host interface used for communication with WLAN part of
a baseband chip and USB Host interface used for communication with BT part of a baseband chip,
thus allowing higher and more effective data management and throughput.
Intel® Dual Band Wireless-AC 7260 code name Wilkins Peak 2 (WP2) shall be the VHT-5G WiFi 2x2
and Bluetooth combination single chip solution. WP2 shall use Intel’s 1
st
generation 802.11ac WiFi
solution and shall support both 2.4, and 5GHz bands. On 5GHz band, it shall operate on an 80MHz
wide channel reaching PHY rates of up to 867Mbps. WP2 shall use a Bluetooth core that shall
support Bluetooth 4.0 standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy
(BLE). WP2 shall have 2 antenna ports: one shall be WiFi only and the second will be shared
between WiFi and Bluetooth. WiFi shall support Rx antenna diversity.
Note: Any other mini PCIe half size RF module can be installed and with relevant driver package
can provide wireless infrastructure for the system.
4.4 Wireless Module Features
Table 27 – Wireless Module Features
WLAN
Features
WiFi
802.11ac 2x2
Antennas
2
WLAN TX/RX chains
2x2 chains
WLAN Frequency band
2.4GHz, 5GHz
Antenna Allocation
a. WLAN only
b. WLAN/BT shared
Wi-Fi TX/RX Throughput
867Mbps
Security
Authentication: WPA, WPA2
Encryption: 64-bit and 128-bit WEP, AES-CCMP, TKIP
Management Frame Protection: 802.11w
BT
Features
Bluetooth Core
Bluetooth 4.0
BT Throughput
24Mbps
BT Frequency band
2.4GHz
Host Interface
USB
General
Features
Intel® WiDi Support
Intel® WiDi 4
AMT Support
(Windows OS only)
AMT9.5
AMT9.0.20
For more information, including WLAN/BT detailed channel list contact Intel or Compulab.