Owner`s manual

10
Intel
 CPU Control Sub-Menu
o Hyperthreading – enable or disable hyperthreading
o Processor Full Speed – select power management policy
o No Execute – enable or disable NX bit virus protection
o Intel Virtualization – enable or disable virtualization support
 Chipset Control Sub-Menu
o Audio – enable or disable audio
o SDIO – enable or disable SD socket
o PCI Express – Root Port 1 – enable or disable PCIe port of Ethernet 1
o PCI Express – Root Port 2 – enable or disable PCIe port of Ethernet 2
 Video (Intel IGD) Control Sub-Menu
o Graphic Memory Aperture Size – [256MB | 128MB] Select how much memory to
allocate for graphics. Main memory available is reduced by the amount chosen
Security
This section allows the setting of:
 Supervisor password for protecting setup utility
 User password for protecting fit-PC2i boot
If you wish to clear a password, set a new, blank password.
Boot
Select a boot sequence between the built-in HDD, built-in flash disk, USB thumb drive (USB key), USB
CDROM, USB HDD and USB Floppy (FDC).
Booting over LAN (PXE) is enabled separately (see above).
Booting from SD is not supported.
Exit
Standard options for saving/discarding BIOS changes or reloading BIOS defaults.