Specifications

362
INSTALLATION & OPERATING
MANUAL
MHWX Hi-Wall Fan Coils
9,000 – 36,000 BTUH
MHWX CONTROLS OPERATION GUIDE
FUNCTION
4. TEMPERATURE SETTING
- Press “Ÿ” to increase set temperature.
- Press “ź” to decrease set temperature.
- Press “Ÿ” and “ź” Simultaneously to toggle between °C and °F display mode.
- Temperature range: 16 C to 30°C in °C display mode and 60°F to 86°F in °F
display mode.
5. CANCEL
- To cancel any setting on the delay timer.
6. LOUVER
- Two different functions are available:
1. To set the louver stop position. There are 4 angles available. The sequence is as follows.
2. To set the louver swing (continuous motion). The sequence is as follows.
7. AUTO
- This function will automatically control the system switching between heating and
cooling operation. If the present auto mode is cooling, a switch to heating
operation will begin only if the actual room temperature is 7° below selected
control set point. If the present auto mode is heating, a switch to cooling operation
will begin only when the room temperature is 3° above selected control set point.