Installation guide

30
Some devices may emit the IR signals. Please check if there are any
microwaves or lights that may be doing this. And make sure as few cables as
possible are crossing the IR receiver.
At last, if you have switched the blue jumper to another pin set, you have to
switch the red jumper JX8 (T300) / J10 (T200) to 2-3(right) in order to use
remote function.
My PC is not stable after plugging in TV card?
Verify that the TV Tuner card is securely seated in the PCI slot. Removing and
reseating the card can help.
Make sure the PCI TV card is using an independent IRQ. Try moving the card
to another PCI slot.
Check your motherboard BIOS settings, as follows:
Assign IRQ to VGA — ENABLE
PCI Master 0 Write — DISABLE
CPU to PCI write buffer — DISABLE
PCI Latency Timer — a higher value (64) can help image quality
Contacting Compro Technical Support
Before you submit an email for support, please check support FAQs on our
web site. http://www.comprousa.com/support
You can download the latest update from our website. Many issues should be
solved on the newer version. When contacting Compro for technical support,
please use the Compro support request form and provide as much of the
requested information as possible. Please write the details in order to
determine the problem. And also provide the product serial number (19 digits
numbers) on the PCI card. Please use the form from below or email to
[e-mail].
http://www.comprousa.com/support/form.htm
Note
Make sure you include the information of hitting the button of "E-mail Info" in
the Device Settins in Settings of ComproDTV in order to determine the
problem.
In order to solve the problem quickly, it is very important to provide as much
detail as possible.