Installation guide

21
Digital TV Settings
This option gives you the way to manually set the method of scanning digital
TV programs. Select your choice here or use default channel table to do the
scanning.
Autoscan
The first time you start ComproDTV, Autoscan will automatically scan for
available TV channels for TV signals. You can rescan the channels at any time
by pressing the Autoscan button.
When Autoscan is finished, detected channels are automatically enabled and
marked with the green check mark . Channels, where a valid signal could
not be detected, are disabled and marked with a blank. However, you can
interrupt the scanning process by pressing the Stop button.