Operating instructions

9-72 ProfibusDriveReset
Option: Function:
[0] * No action
[1] Power-on
reset
Resets frequency converter upon power-up, as
for power-cycle.
[3] Comm
option reset
Resets the Profibus option only, useful after
changing certain settings in parameter group
9-**, e.g. par. 9-18 Node Address.
When reset, the frequency converter
disappears from the fieldbus, which may cause
a communication error from the master.
9-80 Defined Parameters (1)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
Profibus.
9-81 Defined Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
Profibus.
9-82 Defined Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
Profibus.
9-83 Defined Parameters (4)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
Profibus.
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the frequency
converter parameters deviating from default
setting.
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the frequency
converter parameters deviating from default
setting.
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the frequency
converter parameters deviating from default
setting.
9-94 Changed Parameters (5)
Array [116]
No LCP Address
Read only
Range: Function:
0 * [0 - 9999 ] This parameter displays a list of all the frequency
converter parameters deviating from default
setting.
Parameter Description
VLT
®
HVAC Drive Programming Guide
MG.11.CA.02 - VLT
®
is a registered Danfoss trademark 87
3
3