Operating instructions

8-82 Slave Messages Rcvd
Range: Function:
0 * [0 - 0 ] This parameter shows the number of valid telegrams
addressed to the slave, sent by the frequency
converter.
8-83 Slave Error Count
Range: Function:
0 * [0 - 0 ] This parameter shows the number of error telegrams,
which could not be executed by the frequency
converter.
8-84 Slave Messages Sent
Range: Function:
0 * [0 - 0 ]
8-85 Slave Timeout Errors
Range: Function:
0 * [0 - 0 ]
3.9.8 8-9* Bus Jog
8-90 Bus Jog 1 Speed
Range: Function:
100 RPM * [Application
dependant]
Enter the jog speed. This is a fixed
jog speed activated via the serial
port or fieldbus option.
8-91 Bus Jog 2 Speed
Range: Function:
200 RPM * [Application
dependant]
Enter the jog speed. This is a fixed
jog speed activated via the serial
port or fieldbus option.
8-94 Bus Feedback 1
Range: Function:
0 * [-200 -
200 ]
Write a feedback to this parameter via the serial
communication port or fieldbus option. This
parameter must be selected in par. 20-00 Feedback
1 Source, par. 20-03 Feedback 2 Source or
par. 20-06 Feedback 3 Source as a feedback source.
8-95 Bus Feedback 2
Range: Function:
0 * [-200 - 200 ] See par. 8-94 Bus Feedback 1 for further details.
8-96 Bus Feedback 3
Range: Function:
0 * [-200 - 200 ] See par. 8-94 Bus Feedback 1 for further details.
Parameter Description
VLT
®
HVAC Drive Programming Guide
82 MG.11.CA.02 - VLT
®
is a registered Danfoss trademark
3
3