Operating instructions

1.1.4 Abbreviations
Alternating current AC
American wire gauge AWG
Ampere/AMP A
Automatic Motor Adaptation AMA
Current limit I
LIM
Degrees Celsius
°C
Direct current DC
Drive Dependent D-TYPE
Electro Magnetic Compatibility EMC
Electronic Thermal Relay ETR
Frequency Converter FC
Gram g
Hertz Hz
Kilohertz kHz
Local Control Panel LCP
Meter m
Millihenry Inductance mH
Milliampere mA
Millisecond ms
Minute min
Motion Control Tool MCT
Nanofarad nF
Newton Meters Nm
Nominal motor current I
M,N
Nominal motor frequency f
M,N
Nominal motor power P
M,N
Nominal motor voltage U
M,N
Parameter par.
Protective Extra Low Voltage PELV
Printed Circuit Board PCB
Rated Inverter Output Current I
INV
Revolutions Per Minute RPM
Regenerative terminals Regen
Second s
Synchronous Motor Speed n
s
Torque limit T
LIM
Volts V
The maximum output current I
VLT,MAX
The rated output current supplied by the
frequency converter
I
VLT,N
1.1.5 Available Literature for VLT HVAC Drive
- Operating Instructions MG.11.Ax.yy provide the
necessary information for getting the frequency
converter up and running.
- Operating Instructions VLT HVAC Drive High Power,
MG.11.Fx.yy
- Design Guide MG.11.Bx.yy entails all technical
information about the frequency converter and
customer design and applications.
- Programming Guide MG.11.Cx.yy provides informa-
tion on how to programme and includes complete
parameter descriptions.
- Mounting Instruction, Analog I/O Option MCB 109,
MI.38.Bx.yy
- Application Note, Temperature Derating Guide,
MN.11.Ax.yy
- PC-based Configuration Tool MCT 10, MG.10.Ax.yy
enables the user to configure the frequency convert-
er from a Windows
™
based PC environment.
-
Danfoss VLT
®
Energy Box software at
www.danfoss.com/BusinessAreas/DrivesSolutions then
choose PC Software Download
- VLT HVAC Drive Drive Applications, MG.11.Tx.yy
- Operating Instructions VLT HVAC Drive Profibus,
MG.33.Cx.yy
- Operating Instructions VLT HVAC Drive Device Net,
MG.33.Dx.yy
- Operating Instructions VLT HVAC Drive BACnet,
MG.11.Dx.yy
- Operating Instructions VLT HVAC Drive LonWorks,
MG.11.Ex.yy
- Operating Instructions VLT HVAC Drive Metasys,
MG.11.Gx.yy
- Operating Instructions VLT HVAC Drive FLN,
MG.11.Zx.yy
- Output Filter Design Guide, MG.90.Nx.yy
- Brake Resistor Design Guide, MG.90.Ox.yy
x = Revision number
yy = Language code
Danfoss technical literature is available in print from your local
Danfoss Sales Office or online at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documenta-
tions/Technical+Documentation.htm
Introduction
VLT
®
HVAC Drive Programming Guide
MG.11.CA.02 - VLT
®
is a registered Danfoss trademark 5
1 1