Operating instructions

0-20 Display Line 1.1 Small
Option: Function:
[2581] Pump Status Status for the operation of each individ-
ual pump controlled by the Cascade
Controller
[3110] Bypass Status
Word
[3111] Bypass
Running Hours
[9913] Idle time
[9914] Paramdb
requests in
queue
[9920] HS Temp. (PC1)
[9921] HS Temp. (PC2)
[9922] HS Temp. (PC3)
[9923] HS Temp. (PC4)
[9924] HS Temp. (PC5)
[9925] HS Temp. (PC6)
[9926] HS Temp. (PC7)
[9927] HS Temp. (PC8)
0-21 Display Line 1.2 Small
Select a variable for display in line 1, middle position.
Option: Function:
[1614] * Motor Current The options are the same as those listed
in par. 0-20 Display Line 1.1 Small.
0-22 Display Line 1.3 Small
Select a variable for display in line 1, right position.
Option: Function:
[1610] * Power [kW] The options are the same as those listed in
par. 0-20 Display Line 1.1 Small.
0-23 Display Line 2 Large
Select a variable for display in line 2.
Option: Function:
[1613] * Frequency The options are the same as those listed in
par. 0-20 Display Line 1.1 Small.
0-24 Display Line 3 Large
Select a variable for display in line 3.
Option: Function:
[1502] * kWh Counter The options are the same as those listed in
par. 0-20 Display Line 1.1 Small.
0-25 My Personal Menu
Array [20]
Range: Function:
Application
depend-
ent
*
[0 -
9999 ]
Define up to 20 parameters to appear in
the Q1 Personal Menu, accessible via the
[Quick Menu] key on the LCP. The parame-
ters will be displayed in the Q1 Personal
Menu in the order they are programmed
into this array parameter. Delete parame-
ters by setting the value to ‘0000’.
For example, this can be used to provide
quick, simple access to just one or up to 20
parameters which require changing on a
regular basis (e.g. for plant maintenance
reasons) or by an OEM to enable simple
commissioning of their equipment.
3.2.4 0-3* LCP Custom Readout
It is possible to customize the display elements for various
purposes: *Custom Readout. Value proportional to speed
(Linear, squared or cubed depending on unit selected in
par. 0-30 Custom Readout Unit) *Display Text. Text string
stored in a parameter.
Custom Readout
The calculated value to be displayed is based on settings in
par. 0-30 Custom Readout Unit, par. 0-31 Custom Readout Min
Value (linear only), par. 0-32 Custom Readout Max Value,
par. 4-13 Motor Speed High Limit [RPM], par. 4-14 Motor Speed
High Limit [Hz] and actual speed.
Parameter Description
VLT
®
HVAC Drive Programming Guide
32 MG.11.CA.02 - VLT
®
is a registered Danfoss trademark
3
3