Operating instructions

ManualsBrandsCOMPRO ManualsComputer equipmentX100 - START UP GUIDE

0-13 Readout: Linked Set-ups

Array [5]

Range: Function:

[0 -

255 ]

View a list of all the set-ups linked by means of

par. 0-12 This Set-up Linked to. The parameter has one

index for each parameter set-up. The parameter value

displayed for each index represents which setups are

linked to that parameter setup.

Index LCP value

0 {0}

1 {1,2}

2 {1,2}

3{3}

4 {4}

Table 3.2: Example: Set-up 1 and Set-up 2 are linked

0-14 Readout: Prog. Set-ups / Channel

Range: Function:

[-2147483648 -

2147483647 ]

View the setting of par. 0-11 Programming

Set-up for each of the four different communi-

cation channels. When the number is

displayed in hex, as it is in the LCP, each

number represents one channel.

Numbers 1-4 represent a set-up number; ‘F’

means factory setting; and ‘A’ means active

set-up. The channels are, from right to left:

LCP, FC-bus, USB, HPFB1.5.

Example: The number AAAAAA21h means

that the FC-bus selected Set-up 2 in

par. 0-11 Programming Set-up, the LCP

selected Set-up 1 and all others used the

active set-up.

3.2.3 0-2* LCP Display

Define the variables displayed in the Graphical Local Control

Panel.

NOTE

Please refer to par. 0-37 Display Text 1, par. 0-38 Display

Text 2 and par. 0-39 Display Text 3 for information on

how to write display texts.

0-20 Display Line 1.1 Small

Option: Function:

Select a variable for display in line 1, left

position.

[0]

None No display value selected

[37] Display Text 1 Enables an individual text string to be

written, for display in the LCP or to be

read via serial communication.

0-20 Display Line 1.1 Small

Option: Function:

[38] Display Text 2 Enables an individual text string to be

written, for display in the LCP or to be

read via serial communication.

[39] Display Text 3 Enables an individual text string to be

written, for display in the LCP or to be

read via serial communication.

[89] Date and Time

Readout

Displays the current date and time.

[953] Profibus

Warning Word

Displays Profibus communication

warnings.

[1005] Readout

Transmit Error

Counter

View the number of CAN control

transmission errors since the last power-

up.

[1006] Readout

Receive Error

Counter

View the number of CAN control receipt

errors since the last power-up.

[1007] Readout Bus

Off Counter

View the number of Bus Off events since

the last power-up.

[1013] Warning

Parameter

View a DeviceNet-specific warning word.

One separate bit is assigned to every

warning.

[1115] LON Warning

Word

Shows the LON-specific warnings.

[1117] XIF Revision Shows the version of the external

interface file of the Neuron C chip on the

LON option.

[1118] LonWorks

Revision

Shows the software version of the

application program of the Neuron C

chip on the LON option.

[1501] Running Hours View the number of running hours of the

motor.

[1502] kWh Counter View the mains power consumption in

kWh.

[1600] Control Word View the Control Word sent from the

frequency converter via the serial

communication port in hex code.

[1601] Reference

[Unit]

Total reference (sum of digital/analog/

preset/bus/freeze ref./catch up and

slow-down) in selected unit.

[1602]

Reference [%] Total reference (sum of digital/analog/

preset/bus/freeze ref./catch up and

slow-down) in percent.

[1603] Status Word Present status word

[1605] Main Actual

Value [%]

View the two-byte word sent with the

Status word to the bus Master reporting

the Main Actual Value.

Parameter Description

VLT

HVAC Drive Programming Guide

MG.11.CA.02 - VLT

is a registered Danfoss trademark 29