Operating instructions

3.2 Main Menu - Operation and Display
- Group 0
Parameters related to the fundamental functions of the
frequency converter, function of the LCP buttons and config-
uration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display.
The frequency converter can be delivered
with 2 different language packages.
English and German are included in both
packages. English cannot be erased or
manipulated.
[0]
* English Part of Language packages 1 - 2
[1] Deutsch Part of Language packages 1 - 2
[2] Francais Part of Language package 1
[3] Dansk Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italiano Part of Language package 1
[6] Svenska Part of Language package 1
[7] Nederlands Part of Language package 1
[10] Chinese Language package 2
[20] Suomi Part of Language package 1
[22] English US Part of Language package 1
[27] Greek Part of Language package 1
[28] Bras.port Part of Language package 1
[36] Slovenian Part of Language package 1
[39] Korean Part of Language package 2
[40] Japanese Part of Language package 2
[41] Turkish Part of Language package 1
[42] Trad.Chinese Part of Language package 2
[43] Bulgarian Part of Language package 1
[44] Srpski Part of Language package 1
[45] Romanian Part of Language package 1
[46] Magyar Part of Language package 1
[47] Czech Part of Language package 1
0-01 Language
Option: Function:
[48] Polski Part of Language package 1
[49] Russian Part of Language package 1
[50] Thai Part of Language package 2
[51] Bahasa Indonesia Part of Language package 2
[52] Hrvatski
0-02 Motor Speed Unit
Option: Function:
This parameter cannot be adjusted while the motor is
running.
The display showing depends on settings in
par. 0-02 Motor Speed Unit and par. 0-03 Regional
Settings. The default setting of par. 0-02 Motor Speed
Unit and par. 0-03 Regional Settings depends on which
region of the world the frequency converter is supplied
to, but can be re-programmed as required.
NOTE
Changing the Motor Speed Unit will reset
certain parameters to their initial value. It is
recommended to select the motor speed
unit first, before modifying other parame-
ters.
[0] RPM Selects display of motor speed variables and parame-
ters (i.e. references, feedbacks and limits) in terms of
motor speed (RPM).
[1]
* Hz Selects display of motor speed variables and parame-
ters (i.e. references, feedbacks and limits) in terms of
output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
This parameter cannot be adjusted while the
motor is running.
The display showing depends on settings in
par. 0-02 Motor Speed Unit and par. 0-03 Regional
Settings. The default setting of par. 0-02 Motor
Speed Unit and par. 0-03 Regional Settings
depends on which region of the world the
frequency converter is supplied to but can be re-
programmed as required.
[0]
* Interna-
tional
Sets par. 1-20 Motor Power [kW] units to [kW] and
the default value of par. 1-23 Motor Frequency [50
Hz].
[1] North
America
Sets par. 1-21 Motor Power [HP] units to HP and
the default value of par. 1-23 Motor Frequency to
60 Hz.
The setting not used is made invisible.
Parameter Description
VLT
®
HVAC Drive Programming Guide
26 MG.11.CA.02 - VLT
®
is a registered Danfoss trademark
3
3