Operating instructions

Logging Buffer Full 16-40 115
Logging Interval 15-11 109
Logging Mode 15-13 110
Logging Source 15-10 108
Loggings 17
Logic Rule Boolean 1 13-40 96
Logic Rule Boolean 2 13-42 98
Logic Rule Boolean 3 13-44 99
Logic Rule Operator 1 13-41 98
Logic Rule Operator 2 13-43 99
Lon Warning Word 11-15 91
Lonworks 91
Lonworks Revision 11-18 91
Low Power Auto Set-up 22-20 141
Low Power Detection 22-21 141
Low Speed Detection 22-22 141
[Low Speed Hz] 22-33 143
Low Speed Load Compensation 1-60 42
[Low Speed Power Hp] 22-35 143
[Low Speed Power Kw] 22-34 143
[Low Speed Rpm] 22-32 143
M
Mac Id 10-02 88
[Main Actual Value %] 16-05 113
Main Menu - Drive Information - Group 15 108
Main Menu Mode 12, 16
Main Menu Mode 22
Main Menu Password 0-60 35
Main Menu Structure 25
Main Reactance 40
Main Reactance (xh) 1-35 41
Mains Failure 14-10 102
Mains On/off 102
Mains Supply 8
Mains Voltage At Mains Fault 14-11 103
Maintenance Action 23-11 154
Maintenance Date And Time 23-14 155
Maintenance Item 23-10 154
Maintenance Log: Action 18-01 119
Maintenance Log: Date And Time 18-03 119
Maintenance Log: Item 18-00 119
Maintenance Log: Time 18-02 119
Maintenance Text 23-16 155
Maintenance Time Base 23-12 154
Maintenance Time Interval 23-13 154
Maintenance Word 16-96 118
Manual Alternation 25-91 176
Manual Initialisation 24
Max Output Frequency 4-19 55
Maximum Boost Time 22-46 146
Maximum Feedback Level 20-74 129, 133
Maximum Inter-char Delay 8-37 78
Maximum Limit 3-93 53
Maximum Reference 3-03 48
Maximum Reference/feedb. 20-14 124
Maximum Response Delay 8-36 78
[Min Speed For Function At Stop Hz] 1-82 43
[Min Speed For Function At Stop Rpm] 1-81 43
[Min Speed Normal Magnetising Hz] 1-52 41
[Min Speed Normal Magnetising Rpm] 1-51 41
Minimum Aeo Frequency 14-42 106
Minimum Bin Value 23-65 158
Minimum Feedback Level 20-73 129, 133
Minimum Limit 3-94 53
Minimum Reference 3-02 48
Minimum Reference/feedb. 20-13 123
Minimum Response Delay 8-35 78
Minimum Run Time 22-40 145, 148
Minimum Sleep Time 22-41 145
Missing Motor Coefficient 1 24-91 165
Missing Motor Coefficient 2 24-92 165
Missing Motor Coefficient 3 24-93 165
Missing Motor Coefficient 4 24-94 165
Missing Motor Function 24-90 165
Missing Motor Phase Function 4-58 56
Modified Parameters 15-93 112
Motor Cosphi 14-43 106
Motor Current 1-24 39, 113
Motor External Fan 1-91 45
Motor Frequency 1-23 39
Motor Magnetisation At Zero Speed 1-50 41
Motor Nominal Speed 1-25 39
Motor Poles 1-39 41
[Motor Power Hp] 1-21 39
[Motor Power Kw] 1-20 39
Motor Protection 44
Motor Rotation Check 1-28 39
Motor Speed Direction 4-10 54
[Motor Speed High Limit Hz] 4-14 54
[Motor Speed High Limit Rpm] 4-13 54
[Motor Speed Low Limit Hz] 4-12 54
[Motor Speed Low Limit Rpm] 4-11 54
Motor Speed Unit 0-02 26
Motor Start 25-02 168
Motor Status 113
Motor Thermal 16-18 114
Motor Thermal Protection 1-90 44
Motor Voltage 1-22 39, 113
Ms/tp Max Info Frames 8-73 81
Ms/tp Max Masters 8-72 81
My Personal Menu 0-25 32
N
Net Control 10-15 90
Net Reference 10-14 90
Neuron Id 11-00 91
Nlcp 14
No Operation 18
No Trip At Inverter Overload 107
Node Address 9-18 84
No-flow Delay 22-24 141
No-flow Function 22-23 141
No-flow Power 22-30 142
Number Of Pumps 25-06 168
Number Of Starts 15-08 108
O
Obw Time 25-25 170
Occurrence 23-04 152
Off Action 23-03 152
Off Delay, Relay 5-42 65
Off Time 23-02 152
[Off] Key On Lcp 0-41 34
On Action 23-01 151
On Delay, Relay 5-41 65
On Reference Bandwidth 20-84 130
On Time 23-00 151
Operating Hours 15-00 108
Operating Mode 27
Operating State At Power-up 0-04 27
Index
VLT
®
HVAC Drive Programming Guide
228 MG.11.CA.02 - VLT
®
is a registered Danfoss trademark