Operating instructions

3.15.6 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options instal-
led in slots A, B C0 and C1.
15-60 Option Mounted
Range: Function:
0 * [0 - 0 ] View the installed option type.
15-61 Option SW Version
Range: Function:
0 * [0 - 0 ] View the installed option software version.
15-62 Option Ordering No
Range: Function:
0 * [0 - 0 ] Shows the ordering number for the installed options.
15-63 Option Serial No
Range: Function:
0 * [0 - 0 ] View the installed option serial number.
15-70 Option in Slot A
Range: Function:
0 * [0 - 0 ] View the type code string for the option installed in
slot A, and a translation of the type code string. E.g.
for type code string 'AX' the translation is 'No option'.
15-71 Slot A Option SW Version
Range: Function:
0 * [0 - 0 ] View the software version for the option installed in
slot A.
15-72 Option in Slot B
Range: Function:
0 * [0 - 0 ] View the type code string for the option installed in
slot B, and a translation of the type code string. E.g.
for type code string 'BX' the translation is 'No option'.
15-73 Slot B Option SW Version
Range: Function:
0 * [0 - 0 ] View the software version for the option installed in
slot B.
15-74 Option in Slot C0
Range: Function:
0 * [0 - 0 ] View the type code string for the option installed in
slot C, and a translation of the type code string. E.g.
for type code string 'CXXXX' the translation is 'No
option'.
15-75 Slot C0 Option SW Version
Range: Function:
0 * [0 - 0 ] View the software version for the option installed in
slot C.
15-76 Option in Slot C1
Range: Function:
0 * [0 - 0 ] Shows the typecode string for the options (CXXXX if
no option) and the translation i.e. >No option<.
15-77 Slot C1 Option SW Version
Range: Function:
0 * [0 - 0 ] Software version for the installed option in option
slot C.
3.15.7 15-9* Parameter Info
15-92 Defined Parameters
Array [1000]
Range: Function:
0 * [0 - 9999 ] View a list of all defined parameters in the
frequency converter. The list ends with 0.
15-93 Modified Parameters
Array [1000]
Range: Function:
0 * [0 - 9999 ] View a list of the parameters that have been
changed from their default setting. The list ends
with 0. Changes may not be visible until up to 30
seconds after implementation.
15-98 Drive Identification
Range: Function:
0 * [0 - 0 ]
15-99 Parameter Metadata
Array [23]
Range: Function:
0 * [0 - 9999 ] This parameter contains data used by the MCT10
software tool.
Parameter Description
VLT
®
HVAC Drive Programming Guide
112 MG.11.CA.02 - VLT
®
is a registered Danfoss trademark
3
3