Specifications

GETTING TO KNOW YOUR CAR
95
AUTOMATIC TWO-ZONE CLIMATE CONTROL SYSTEM (upon request for
versions/markets where applicable)
To start the system (fig. 105):
- turn the knob rings to set the required
temperatures (driver’s side - passenger’s
side).
- press the
AUTO button.
IMPORTANT The climate control sys-
tem makes it possible to personalise the
temperatures required on the two side with
a maximum difference of 7°C between the
driver’s side and the passenger’s side.
IMPORTANT The climate control com-
pressor only works with the engine running
and an outside temperature above 4°C.
For more detailed information about the
system and how to make the best use of
it, read the instructions given in the follow-
ing pages.
A0A1020m
fig. 105
The coolant used for the
climate control system is
R134a which meets cur-
rent regulations and does not harm
the environment in the event of ac-
cidental spillage. Absolutely avoid
the use of other fluids which are in-
compatible with the system com-
ponents.
With low external tem-
perature the climate con-
trol compressor is unable to
work. It is therefore inadvisable
to use the inside air recirculation
function
v
with low outside
temperature as windows may
mist over quickly
WARNING
At any battery re-
moval/reconnection wait
for at least 3 minutes be-
fore starting the engine, to let the
climate control unit reset the po-
sition of the electrical actuators
controlling the temperature and the
air distribution.
086-109_Alfa147 Q2 GB 4-07-2008 12:00 Pagina 95