Specifications

IN AN EMERGENCY
219
REAR ROOF LIGHT
(fig. 40-41)
To change the bulb, proceed as follows:
– Remove the light unit (A) levering in
the point shown by the arrow.
– Replace the bulb releasing it from the
side contacts making sure that the new bulb
is correctly clamped between the contacts.
– Refit the light unit in the correct position
inserting first the side with the connector,
then pressing the other side until the catch
clicks into place (B).
fig. 40
A0A0177m
fig. 41
A0A0178m
– Close the protective cover (B).
– Refit the light unit pressing gently in cor-
respondence with the retainer catches, un-
til hearing the click.
fig. 39
A0A0176m
197-233_Alfa147 Q2 GB 4-07-2008 12:04 Pagina 219