Specifications

IN AN EMERGENCY
210
D.-E.Halogen bulbs
To remove, free it from the clip on
its housing.
F. Xenon lamps
To remove the bulb, slacken the fas-
tening ring nut and release the
retaining ring.
GENERAL INSTRUCTIONS
– When a light is not working, check that
the corresponding fuse is intact before
changing a bulb.
– For the location of fuses, refer to the
paragraph “In the event of a burnt fuse”
in this chapter.
– Before changing a bulb check the con-
tacts for oxidation.
– Burnt bulbs must be replaced by oth-
ers of the same type and power.
– Always check headlight aiming after
changing a bulb to ensure they are safe.
TYPES OF BULBS (fig. 20)
Various types of bulbs are fitted to your
car:
A. All glass bulbs
These are pressed on. Pull to
remove.
B. Bayonet type bulbs
Press the bulb, turn counter-clock-
wise to remove this type of bulb
from its holder.
C. Tubular bulbs
Free them from their contacts to
remove.
fig. 20
A0A0503m
197-233_Alfa147 Q2 GB 4-07-2008 12:04 Pagina 210