Specifications
GETTING TO KNOW YOUR CAR
159
Fader adjustment
Proceed as follows:
– Use button
▲
or
▼
to select “FADER”
in the AUDIO menu;
– press button
÷
to increase the sound
from the rear speakers or button
˜
to
increase the sound from the front speakers.
Pressing the buttons briefly the change is
gradual by steps. Pressing longer, chang-
ing is faster.
Select “
÷
0
˜
” to set the same val-
ue for both front and rear speakers.
LD function
(excluding versions with Bose
HI-FI system)
The Loudness function improves the sound
volume when listening at low level, in-
creasing the basses and trebles.
To switch the function on/off, use button
▲
or
▼
to select “LD” in the AUDIO menu.
The function condition (on or off) is shown
on the display for few seconds by “LD ON”
or “LD OFF”.
PRESET/XX EQ SET*/CLASSIC/
ROCK/JAZZ functions
(equalizer on/off)
(excluding versions with Bose
HI-FI system)
The integrated equalizer can be turned on
or off. With the equalizer off, it is possible
to change the sound settings only adjust-
ing the bass (“BASS”) and treble tones
(“TREBLE”), while activating the function
makes it possible to adjust the sound curves.
To turn the equalizer off, select “PRESET”
by means of button
÷
or
˜
.
To turn the equalizer on, use button
÷
or
˜
to select one of the following op-
tions:
– “USER” (adjustment of the 7 equaliz-
er bands that can be changed by the user);
– “CLASSIC” (predefined equalizer ad-
justment for best playing of classic music);
– “ROCK” (predefined equalizer adjust-
ment for best playing of rock and pop mu-
sic);
– “JAZZ” (predefined equalizer adjust-
ment for best playing of jazz music).
When one of the equalizer settings is on,
the display shows “EQ”.
*XX EQ SET function
(only if the USER equalizer
setting has been selected)
(excluding versions with Bose
HI-FI system)
To set a personal equalizer adjustment, use
button
▲
or
▼
to select USER and then
press button
▼
for long.
The display will show for about 2 seconds
“XX EQ SET” and then a graph with 7 bars,
where each bar represents a frequency.
Choose the bar to be adjusted using button
÷
or
˜
; the bar chosen starts to flash
and it is possible to adjust it using button
▲
or
▼
.
To store the new settings, press button
AUD again or wait for about 10 seconds.
The display will show the word “MEN” to-
gether with the graph with 7 bars.
Antitheft protection
Refer to paragraph “CD Player”.
110-185_Alfa147 Q2 GB 4-07-2008 12:02 Pagina 159