Service manual

69
CHROMOPHARE® D 650plus, D 530plus, D 500plus, D 650, D 530, D 500 Service Manual (E)
12.BRAKE ADJUSTMENTS
Tools required:
Slotted screwdriver, large
Allen key 3 mm
Allen key 2,5 mm
The braking effect of the individual joints must be adjusted so
that the lamp housing remains in the required position. If a sus-
pension arm of the OP light drifts away, the appropriate brake
screw must be tightened.
The mobility of the swivel arm can be adjusted with the brake
screw (slotted screw).
+ ð Clockwise
− ð Anti-clockwise
The mobility of the swivel arm can be adjusted with the brake
screw (slotted screw).
+ ð Clockwise
− ð Anti-clockwise
The mobility of the light head can be adjusted with the brake
screw.
(Allen key 3 mm)
+ ð Clockwise
− ð Anti-clockwise
Cardan joint (classic cardanic)
The mobility of the cardan joint can be adjusted with the brake
screw.
(Allen key 3 mm)
+ ð Clockwise
− ð Anti-clockwise