Service manual

CHROMOPHARE® D 650plus, D 530plus, D 500plus, D 650, D 530, D 500 Service Manual (E)

3.2.6 Light field plotting model LFN (option only D 650plus, D 650)

The CHROMOPHARE

D 650plus und D 650 can be ordered with an LFN light field plotter as an option. The

light field plotter is an electronic control system, which moves the lamps by electric motor. An infrared beam

which is reflected by a reflector disk controls the light field plotter.

The operator can direct the light field to the position which guarantees

optimum illumination of the surgical area, by means of a reflector disk, the

so-called „Light Pilot“.

The „Light Pilot“ should be held in the centre of the light field as far as

possible and then slowly moved to the desired position. If movement is

too quick, the light field will not be able to follow the „Light Pilot“.

This rule is: Wherever the light field is , the „Light Pilot“ will be hit by the

infrared beam and can reflect the beam back.

3.3 Accessories for CHROMOPHARE® generation D

3.3.1 Sterilizable hand grip sleeves

• Standard replacement sleevesOrder no. CZ 499-06

• Replacement sleeves for LFN (only D 650plus, D 650)Order no. CZ 498-04

• Replacement sleeves for light system with ChromoVision® AFIIOrder no. CZ 498-06

Note!

Each CHROMOPHARE® D 650plus light system has sterilizable handles.

For directions about cleaning, disinfection and sterilization, see page 10.

3.3.2 Halogen bulbs (reserve halogen bulbs)

3.3.2.1 CHROMOPHARE® D 650plus, D 530plus, D 500plus

• Halogen bulb 22,8 V/ 150 WOrder no. CZ 908-22

3.3.2.2 CHROMOPHARE® D 650

• for light with color temperature 4500K 22,8 V/ 250 WOrder no. CZ 907-22

• for light with color temperature 3600K 22,8 V/ 150 WOrder no. CZ 908-22

3.3.2.3 CHROMOPHARE® D 530, D 500

• for light with color temperature 4500K 22,8 V/ 150 WOrder no. CZ 908-22

• for light with color temperature 3600K 22,8 V/ 110 WOrder no. CZ 905-22