Operating instructions

CHROMOPHARE

D 650plus, D 530plus,D 300, C 95x Operating instructions (E)

Fit a new halogen bulb into the bulb holder, - for the booking

reference number see chapter 4.6.2 halogen bulb, ( do not touch

the quartz cone of the halogen bulb with your bare fingers, use a

cloth or soft paper). During a lamp change check the bulb holder

for scorch marks. If scorch marks are present, inform our service

department.

Fit the light system back into the holder (picture 4) an screw up

the knurled crews in a clockwise direction.

Switch the lighting system on and check that the lamp is on and

the red indicator light is off.

Note!

Only use original halogen bulbs. If other bulbs are used, all guarantees regarding performance and op-

eration will lapse.