Operating instructions

CHROMOPHARE

D 650plus, D 530plus,D 300, C 95x Operating instructions (E)

4.4 CHROMOPHARE

D 300 double arm and single arm

The ON/OFF switch is situated at the top of the light head..

Push the switch to switch the light on or off.

4.5 Notes on operation and Positioning the lights

Before an operation the lamp housing should be placed in an initial position, so that it can later be easily adjusted

both horizontally and vertically. In the case of a single light, it is positioned over the center of the surgical area (see

illustration 1). The distance from the lower edge of the light to the operating table is approx. 1.15 m. Initial posi-

tioning is accomplished by using the rail on the lamp housing. The surgeon has the option of adjusting the light

using the center hand grip, which is provided with a replaceable sterilized sleeve. In the case of combination lights

the main light is positioned over the center of the surgical area and the additional light over the foot area.

The light should be set in the basic position so that the position of the lamp housing may be changed easily with-

out using force and the control unit can be reached easily by “non-sterile” personnel to adjust the brightness.