Operating instructions

17
CHROMOPHARE
®
D 650plus, D 530plus,D 300, C 95x Operating instructions (E)
4.3 Control Panel and symbols CHROMOPHARE
®
D 530plus
The following functions can be controlled by the control panel
1 ON Switch on the light
2
OFF Switch off the light
3
Bright Increase intensity (the reach of the maximum intensity will be displayed by a
light emitting diode)
4
Dark Decrease intensity (the reach of the minimum intensity will be displayed by a
light emitting diode)
5
Fault LED indicates that the control unit has a fault
Options:
6
EndoLite
®
Switch from surgical area light to surround light (option only)
7
OP light Switch from surround light to surgical area light
(ON) The OP light is switched on by pressing Key 1.
(OFF) The OP light is switched off by pressing Key 2.
(Bright) By pressing and holding down Key 3 the illumination is continuously increased up to the maxi-
mum value. Repeated short presses increase the illumination in steps.
(Dark) By pressing and holding down Key 4 the illumination is continuously reduced down to the mini-
mum value. Repeated short presses decrease the illumination in steps.
(Fault) If the indicator light shows red, there is a fault in the control unit electronics.
EndoLite
®
Only with the EndoLite
®
option. By pressing Key 6 the surgical area illumination is switched off
and the surround lighting is switched on.
(OP light) Only with the EndoLite
®
option. By pressing Key 7 the EndoLite
®
surround lighting is switched
off and the surgical area lighting is switched on again.