Technical data

ManualsBrandsCOMPRO ManualsTV TunerU700 - START UP GUIDE

49 / 60 HBC-series V7 LV small types profi low power

NEUTRÁL

Full throttle forward

Full throttle backward

NEUTRÁL

Min. throttle

Full throttle

Min. throttle

Start with Automatic throttle limits

In the parameter P4, „Control signal” is set „Automat“, this is also default setting.

Very helpful information about how controller evaluates the current

position of the throttle stick, give LEDs of the controller.

 Signal sources with NEUTRAL (with lock of STOP position)

(position STOP is identical with the position „Neutral“ )

1) Turn on control signal source with joystick (potentiome-

ter, control signal, …) in „Neutral“ position (=STOP)

2) Turn on controller, wait for blue LED + yellow LED continuous lights + 1× short beep …………..

3) Controller alternately light yellow LED and

green LED  challenge to moving throttle stick from

“neutral” to “full throttle forward” position.

After finishing of motion light green LED + 3× short beep

4) Controller alternately light green LED and red LED 

challenge to moving throttle stick from “full throttle

forward” position to “full throttle backward” position.

After finishing of motion light red LED + 2× short beep

5) Controller alternately light red LED and yellow LED

 challenge to moving throttle stick from “full throttle

backward” position to “neutral” position.

After finishing of motion light yellow LED + 2× short

beep + play melody

6) You can start now (controller is ready to run).

 Signal sources without NEUTRAL (without lock of STOP position)

(position STOP is identical with the position „Min. throttle “ )

1) Turn on control signal source with joystick (potentiometer,

control signal, …) in „Neutral“ position (=STOP))

2) Turn on controller and wait for blue LED + yellow LED continuous lights + 1× short beep

3) Controller alternately light yellow LED and green LED 

challenge to moving throttle stick from “neutral” to “Full

throttle” position.

After finishing of motion light green LED + 3× short beep. …

4) Controller alternately light green LED and red LED 

challenge to moving throttle stick from “Full throttle”

position to “Min. throttle” position.

After finishing of motion light red LED + 2× short beep

5) Stay on this “Min. throttle” position (STOP) at least

3 seconds, controller light yellow LED + play melody

6) You can start now (controller is ready to run).

♪ 

>3 sec.

♪ 

wait

♪ 

wait

0.15 V

(1 ms)

+1.65 V (1.5 ms)

+3.15 V

(2 ms)

Neutral=STOP

forward

backward

100% backward

100% forward

STOP position (NEUTRAL)

½ throttle

max. throttle

min. throttle

(=STOP)